Express Software Production

ThreadSpecs3 ™ - What's New


Version 1 Changes:

(Your version number is at the top of the main program screen.)
When Version What
7/6/18 1.04.0706
  • Tabulated values for UNJ classes 2A and 2B have been included.
  • Additional corrections were made to UNJ class 2A GO Work Ring minor diameters.
  • Previously displayed tolerances for UNJ class 2B minor diameter tolerances were incorrect. Both tabulated and calculated values, including the maximum minor diameters, have been corrected.
  • Correction to MJB buttress : gage lead tolerances had been reported in inch, should be metric.
  • 9/26/17 1.03.0912
  • The user can choose between 4 and 5 decimal places for threads using inch units.
  • Internal Metric threads can now use the (nonmandatory) "E" tolerance position.
  • Now available with both standalone and network editions : option to use H28-1969 value for UN external maximum minor diameter.
  • Now available with both standalone and network editions : option to use B1.5 Appendix B for multi-start Acme threads.
  • Bug fix : Grade 6 minor diameter tolerances for non-standard MJ internal threads were corrected.
  • Bug fix : Full form major diameters of NOT GO UN set plugs for some small sizes were corrected.
  • Bug fix : The maximum minor diameters of GO work rings for some UNJ class 2A threads were corrected.
  • 7/22/16 1.02.0722
  • Option to use H28-1969 value for UN external maximum minor diameter corrected for classes 1A and 2A. (Formerly network edition only)
  • 6/29/16 1.02.0629
  • Option to use H28-1969 value for UN external maximum minor diameter. (Formerly network edition only)
  • Option to use B1.5 Appendix B for multi-start Acme threads. (Formerly network edition only)
  • 5/4/16 1.02.0504
  • Corrected pitch diameter tolerances for 1A and 2B UN threads. The calculated tolerances for standard sizes were using a length of engagement equal to 9 pitches, even when the length of engagement should have been set to the basic major diameter.
  • 10/13/15 1.01.1013
  • New : lead and flank tolerances for gages shown on screen and print
  • New : User can now enter actual wire size in units different from default, e.g. in inches for a metric thread
  • New : UN external max minor diameter now conforms to B1.1-2003 Paragraph 8.3.1
  • Fixed error in tolerances for some buttress class W plugs
  • Fixed rare bug triggered by incorrectly formatted designations
  • 2/13/15 1.01.0213
  • Warn that certain metric pitch and class combinations are invalid
  • Fix minor tolerance rounding errors for some special UN thread sizes
  • A 30-day trial version is available
  • 10/13/14 1.00.1013
  • Minor corrections to the display of UNR dimensions
  • Tabulated values for 4.625-12 UNJ-3B minor diameter corrected
  • Users can now enter small sizes with the #-style designation, e.g. #5 for .125" diameter
  • 9/19/14 1.00.0919
  • Correction to lead angle for tabulated 60° UN and metric threads with multiple starts
  • Earlier Prior to 1.00.0919
  • Allowances for coatings supported
  • Non-standard size-pitch combinations flagged by yellow highlight
  • Some invalid values flagged by red highlight

  • Return to Main Support Page ESP Home

    Copyright © 2014-2018 Express Software Production
    Last Reviewed or Updated: September 4, 2018